GCS100A - Gas Connector System 100A
The heart of the Gas Connector System consists of 2 quick release hose fittings, one male and one female. The hose with the male fitting connects to your ADV or a 2nd stage and the female connects to the intermediate (low) pressure port of your first stage.
When the hoses are disconnected both the male and the female ends are sealed automatically allowing easy and secure release and connection of side-mounted cylinders and allowing a change of gas supply if required.
1 x GC1/24 - 24" hose - female snap connector and 1st stage end
1 x GC2/24 - 24" hose - male connector and ADV end
1 x EV50/24 - AA 24" hose - female snap connector & 1st stage end
Same as GCS100 but without the FLOWSTOP.
Fit GC1 to the side-mount. Fit GC2 to the rebreather ADV and the AP150 to the on-board diluent manifold.
This enables you to connect the ADV to the onboard diluent when diving with air diluent
or to the off-board side-mount for trimix diluent.
All hoses can be shortened by unscrewing the reusable end fittings and cutting the hose to the required length.
The ends can then be screwed back on. NOTE: The crimped 9/16" UNF ends are not reusable.
Longer hoses are available on request.