Silent Diving Direct
Product Information
 Air Filling Accessories   Compressor Charging Adaptor
 Auto Diluent Valve (ADV)   ADV Service Kit    Auto Diluent Valve (ADV)
 Books/Manuals/Coffee Mugs/DVDs
 Consumables   Batteries    Oxygen Cells    Rely-On    Scrubber Cartridge Filters
 Cylinders & Valves   Cylinder/Valve Combos    Cylinders    Valves
 DivePlanner and DiveStore   DivePlanner and DiveStore
 Gas Connector System (GCS)   Complete GCS Kits    Gas Connector System (GCS)    Solenoid Shut Off Valve
 Gauges   Diluent Gauges    Interstage Pressure Gauge    Miniature Pressure Gauge    Oxygen Gauges
 General Accessories   Lift Bags    Nexus Dive Computer    Pocket Reel    Surface Marker Buoys (SMB)
 General Spares   Crotch Straps    Pressure Relief Valve
 Insp/Evo Accessories   Brass Trigger Hook    Buckles    Carry Boxes    Cell Validator    CO2 Sensor    D-Rings and 3-Bar Sliders    Dry Suit Inflator Side Stems    Elastic Handset Strap    Mouthpiece Headstrap    Off-Board Cylinder Attachments    Pockets    Railtail    Rebreather Lifting Bar    Stage Cylinder Band Kits    Verti-Clip & D-Ring
 Maintenance   ADV Service Kit    AutoAir Service Kit    Convoluted Hose O Rings    Diluent Inflator Service Kit    Expedition Saver Kits    First Stage Service Kits    Grease    Insp Classic Scrubber O Rings    Misc Service Kits    Mouthpiece Service Kits    OCB Service Kit, Spares & Tools    Oxygen Inflator Service Kit    Pillar Valve Service Kits    Scrubber O Rings - Vision    TearAid Repair Kits    Tools
 Nautilus Lifeline
 OCB Mouthpiece   OCB - Open Circuit Bailout & FFM
 Oxygen Filling Accessories   DIN Connector    Oxygen Decanting Hoses
 Replacement Parts   Battery Box Parts    Bridge Interface and Cables    Buzzer Retainer    Canister Strap    Cases & Parts    Convoluted Hose Fittings    Convoluted Hoses    Counterlungs    Cylinder Straps    Evolution M/H Pressure Hoses    Evolution Manifold    Exhaust Valves    Fastex Buckles    First Stages    Handset Parts    Head Up Display (HUD)    Inspiration M/H Pressure Hoses    Inspiration Manifold    Inspiration Manifold Bracket    Inspiration Top Weight Pocket    Integrated Weight Harness    Manual Inflators    Mixing Chamber Parts    Mouthpiece & Parts    Nuts and Bolts    Oxygen Pressure Relief Valve    Oxygen Solenoid Valve    Scrubber Cartridges    T Pieces    Wings
 Scrubber Monitor   Evolution Scrubber Monitor    Inspiration Scrubber Monitor
 Tek/Travel Frame   Tek/Travel Frame
Back Mounted Conterlung - Oxygen Manual Inflator
Product Code: RBV05A

The Oxygen Inflator and hose assembly is designed specifically for use with the new APD Back Mounted Counterlungs.

Note: This oxygen inflator assembly is NOT included with the BMCL and harness combo and is required for all non-PADI REC configured units.

The assembly consists of 3 parts:

  • Oxygen Inflator block (with green button)
  • Hose (Inflator block to Counterlung inlet - available in 3 sizes)
  • Inlet Post (replaces blanking plate on counterlung)

  • Hose Lengths

    Please specify the hose length required when ordering.

    Existing customers:

    The hose length is determined by your current counterlung size (see label on the back). i.e.

    Evolution or Evolution Plus
    Medium Counterlung - you need the 70cm hose
    Large - 76m
    XLarge - 76cm

    Medium Counterlung - you need the 76cm hose
    Large - 84cm
    XLarge - 84cm

    New customers:

    To measure: wearing trousers with a belt and a T shirt, measure from the lower edge of the belt at the front, over-the-shoulder and down to the belt at the back. Take the measurement on inhale.

    Under 110cm/43.3" = you need the 70cm hose for the Evolution/Evolution Plus or the 76cm hose for the Inspiration
    Over 110cm/43.3" = you need the 76cm hose for the Evolution/Evolution Plus or the 84cm hose for the Inspiration

    Please contact Silent Diving LLC if you need further advice on sizing.

    If in doubt you should order the larger size. The hose length can be easily shortened to suit your preference by removing the reusable fitting at the inflator block end, cutting the hose as required and re-fitting. Full instructions on how to do this are included in the BMC manual.

    Available Options:
    Hose Length:
    USD $149.00
    Additional Images:

     Customers who bought this product also purchased
    Inspiration Inner Case (2008+)

    Inspiration Inner Case (2008+)
    TEK Frame Canister Retaining Screw

    TEK Frame Canister Retaining Screw
    Inspiration Off-board (3 litre) Cam Bands

    Inspiration Off-board (3 litre) Cam Bands
       Shopping Basket
      Basket Empty
    Delivery & Returns
    Terms & Conditions
    Contact Us

    View All Products
    Shopping Basket
    Terms and Conditions
    Existing Customers

    My Account
    My Order Status
    Shipping and Returns